The Tenergy 3.7V Li-Ion Arlo Camera Battery Replacement is a high-performance, rechargeable power source designed for Arlo security cameras. It ensures extended runtime, compatibility with multiple Arlo models, and reliable performance in outdoor conditions. To replace, remove the old battery, insert the Tenergy unit, and recharge via USB. Always verify compatibility and follow safety guidelines to avoid damage.
Global Batteries Official Website
How Do You Properly Install a Tenergy 3.7V Battery in an Arlo Camera?
Power off the camera, open the battery compartment, and remove the depleted unit. Align the Tenergy battery’s contacts with the camera’s terminals, then secure the cover. Recharge the battery fully before initial use via a 5V USB charger. Avoid forcing the battery—incorrect insertion may damage contacts. Sync the camera afterward to ensure functionality.
For optimal installation, consider environmental factors. Cameras exposed to direct sunlight may require more frequent battery swaps due to heat-induced energy drain. Use a microfiber cloth to clean the battery compartment contacts every 3 months, as oxidation can reduce conductivity. If the battery feels loose, check for worn compartment springs—these can be gently bent upward with needle-nose pliers for better grip.
| Step | Tool Needed | Time Required |
|---|---|---|
| Battery Removal | None | 15 seconds |
| Contact Cleaning | Isopropyl alcohol & swab | 2 minutes |
| Recharging | USB-C cable & 5W adapter | 4-6 hours |
What Steps Maximize the Lifespan of Your Tenergy Arlo Camera Battery?
Store batteries at 20-25°C in dry conditions. Avoid full discharges; recharge at 20-30% capacity. Use only approved chargers to prevent overheating. Limit exposure to extreme temperatures (-10°C to 40°C). For long storage, maintain a 50% charge. Regularly update Arlo firmware to optimize power management. Replace batteries every 12-18 months or after 300-500 cycles.
Advanced users can implement additional preservation techniques. Pair your camera with Arlo’s optimized power management profile in the app—this reduces unnecessary video clips and adjusts motion sensitivity. In multi-camera setups, rotate batteries between devices to equalize wear patterns. Consider using a smart plug with scheduling to limit charging sessions to 4-hour intervals, preventing overcharge stress on lithium cells.
| Charging Habit | Impact on Lifespan |
|---|---|
| Partial charges (20-80%) | +25% cycle life |
| Overnight charging | -15% cell capacity/year |
| Storage at 50% charge | Prevents voltage depression |
“While third-party batteries like Tenergy offer affordability, always prioritize units with overcharge/over-discharge protection,” says a security tech specialist. “I’ve seen cameras fail due to unstable voltage from uncertified batteries. For outdoor setups, pair replacements with solar panels to reduce swap frequency. Always recycle responsibly—lithium fires in landfills are a growing hazard.”
FAQ
- Can I use Tenergy batteries in Arlo Ultra 2?
- Yes, Tenergy 3.7V batteries are compatible with Arlo Ultra 2. Ensure the model number TN-2440 matches your purchase.
- How long does a Tenergy battery last per charge?
- Approximately 3-6 months, depending on usage. High-traffic areas or frequent motion alerts reduce longevity.
- Does Tenergy offer bulk purchase discounts?
- Yes, Tenergy provides tiered pricing for orders over 10 units. Contact their sales team for custom quotes.